Clean Skin Electrodes

Ten20 conductive paste is water soluble so cleaning the electrodes is easy. 

(1) Wipe the excess conductive paste off of the electrodes.

(2) Place the electrodes in warm water (1/2 cup) and let them soak for about 5-10 minutes.

(3) Wipe electrodes again, all the paste should come off.  A toothbrush may prove helpful.

Electrodes should be cleaned after each use.

Sanitation is not necessary but may be done with any preferred cleaning agent.  After removing the conductive paste from gold cups, apply sanitizing agent to gold cups for 1 minute.  Wipe clean and dry electrodes before next patient.