Set Serial Number and enable IO Card

Error Message: You must set the Serial Number using the Global Parameters in Configure System menu.

Cause: The Espion software requires a Serial Number that is not yet configured in its Settings. 

Action: 1) Select Configure System from the Home Page of the software. 

            2) Double Click to open the Program Folder -> Global Folder.  Configure System Password: masterkey

            3) Scroll until you see Serial Number; enter the system serial number. 

                Note the System Serial Number placement on a Cart or Desktop unit. 

            4) Now open the Hardware Folder -> Console Folder.

            5) Scroll until IO Card Enabled and click to place a Green Check inside this box. 

            6) Close and Save the changes. 

            7) Start the software, things should be back to normal now.