Color Matrix not found

Message: Color Matrix for Stimulator 1, Serial Number ### cannot be found. Using Default Matrix

Cause: Calibration files not present 

Action 1: Check for calibration files; are calibration files present in the software folder. To check for these files, open Window's start menu -> Computer -> C: drive. Choose the Multifocal or Espion folder. Search this folder for a .CAL file. It should look like COLD###.CAL. 

Action 2: Check the software configuration. Is the stimulator serial number listed? Check for the serial number in Configure System -> Hardware -> Ganzfeld -> Serial Number. The serial number should match both the stimulator's decal as well as the number of the calibration file.

Action 3: Check that IO card is enabled. IO Card Enabledcan be found in Configure System -> Hardware -> Console.

Definition: 

.CAL is a file extension used for calibration files. 

Calibration files ensure the stimulator is firing accurate increments of light. 

Configure System is a place to specify all system parameters.